image
electricalpump

ELECTRIC PUMPS MOTOR START PANELS

D.O.L. Start Panel Standard composition Electric control panel-ad- with The circuit includes also:
electricalpump
D.O.L. Start Panel
  • 1 ip55 metal case ral 7032-7035
  • 1 line contactor starter ac3 dimensioned
  • 1 manual reset thermic starters for overload protection
  • 2 auxiliary protection fuse
  • 3 line protection fuses class am
  • 1 door-lock main switch
  • 1 auxiliary terminal board
  • 1 dry running protection electric control panel
  • Selector switch for:
  • Manual position (start motor)
  • Stop position (stop motor)
  • Automatic position (dry running protection include)
  • Led indicators for:
  • Pressure switch
  • Motor running
  • Thermal tripping
  • Minimum water level
  • Maximum water level
Dry running protection relay (this relay can be also used to start the motor for minimum level and to stop for maximum level).This protection is include in automatic position but is possible includes its also in manual position. Timer delay pressure switch range 0-20 minutes. Normally this function is used in irrigation when the motor must be protected for minimum pressure .In this case is necessary to delay the pressure switch when the motor start and after a time (normally is the time that the pump need to go in pressure) include the protection, elapse this time if the pressure go down the motor should be stopped.
Notes : All Controls Are In Low Voltage The pressure switch terminal can be also used to start the motor in automatic way by a remote signal for example: radio transmitter-timer-remote switch-floating
Star/Delta Starter Panels Standard composition Electric control panel-ad- with The circuit includes also:
electricalpump
Series AST 4÷240 kW 400V
  • 1 ip55 metal case ral 7032-7035
  • 1 line contactor starter ac3 dimensioned
  • 1 manual reset thermic starters for overload protection
  • 2 auxiliary protection fuse
  • 3 line protection fuses class am
  • 1 door-lock main switch
  • 1 auxiliary terminal board
  • 1 dry running protection electric control panel
  • Selector switch for:
  • Manual position (start motor)
  • Stop position (stop motor)
  • Automatic position (dry running protection include)
  • Led indicators for:
  • Pressure switch
  • Motor running
  • Thermal tripping
  • Minimum water level
  • Maximum water level
Dry running protection relay (this relay can be also used to start the motor for minimum level and to stop for maximum level).This protection is include in automatic position but is possible includes its also in manual position. Timer delay pressure switch range 0-20 minutes. Normally this function is used in irrigation when the motor must be protected for minimum pressure .In this case is necessary to delay the pressure switch when the motor start and after a time (normally is the time that the pump need to go in pressure) include the protection, elapse this time if the pressure go down the motor should be stopped.
Notes : All Controls Are In Low Voltage The pressure switch terminal can be also used to start the motor in automatic way by a remote signal for example: radio transmitter-timer-remote switch-floating
Impedance Starter Panels Standard composition Electric control panel-ad- with The circuit includes also:
Impedance_Starter_Panels
Series AI 7,5÷270 kW 400V
  • 1 ip55 metal case ral 7032-7035
  • 1 line contactor starter ac3 dimensioned
  • 1 manual reset thermic starters for overload protection
  • 2 auxiliary protection fuse
  • 3 line protection fuses class am
  • 1 door-lock main switch
  • 1 auxiliary terminal board
  • 1 dry running protection electric control panel
  • Selector switch for:
  • Manual position (start motor)
  • Stop position (stop motor)
  • Automatic position (dry running protection include)
  • Led indicators for:
  • Pressure switch
  • Motor running
  • Thermal tripping
  • Minimum water level
  • Maximum water level
Dry running protection relay (this relay can be also used to start the motor for minimum level and to stop for maximum level).This protection is include in automatic position but is possible includes its also in manual position. Timer delay pressure switch range 0-20 minutes. Normally this function is used in irrigation when the motor must be protected for minimum pressure .In this case is necessary to delay the pressure switch when the motor start and after a time (normally is the time that the pump need to go in pressure) include the protection, elapse this time if the pressure go down the motor should be stopped.
Notes : All Controls Are In Low Voltage The pressure switch terminal can be also used to start the motor in automatic way by a remote signal for example: radio transmitter-timer-remote switch-floating
Autotransformer Starter Panels Standard composition Electric control panel-ad- with The circuit includes also:
AUTO_TRANSFORMER_STARTER_PANEL
Series AUT 7,5÷270 kW 400V
  • 1 ip55 metal case ral 7032-7035
  • 1 line contactor starter ac3 dimensioned
  • 1 manual reset thermic starters for overload protection
  • 2 auxiliary protection fuse
  • 3 line protection fuses class am
  • 1 door-lock main switch
  • 1 auxiliary terminal board
  • 1 dry running protection electric control panel
  • Selector switch for:
  • Manual position (start motor)
  • Stop position (stop motor)
  • Automatic position (dry running protection include)
  • Led indicators for:
  • Pressure switch
  • Motor running
  • Thermal tripping
  • Minimum water level
  • Maximum water level
Dry running protection relay (this relay can be also used to start the motor for minimum level and to stop for maximum level).This protection is include in automatic position but is possible includes its also in manual position. Timer delay pressure switch range 0-20 minutes. Normally this function is used in irrigation when the motor must be protected for minimum pressure .In this case is necessary to delay the pressure switch when the motor start and after a time (normally is the time that the pump need to go in pressure) include the protection, elapse this time if the pressure go down the motor should be stopped.
Notes : All Controls Are In Low Voltage The pressure switch terminal can be also used to start the motor in automatic way by a remote signal for example: radio transmitter-timer-remote switch-floating
Starter Panels elevated autotrasformer Standard composition Electric control panel-ad- with The circuit includes also:
SERIES_705_706
Series 705/706 from 26kW to 170kW
  • 1 ip55 metal case ral 7032-7035
  • 1 line contactor starter ac3 dimensioned
  • 1 manual reset thermic starters for overload protection
  • 2 auxiliary protection fuse
  • 3 line protection fuses class am
  • 1 door-lock main switch
  • 1 auxiliary terminal board
  • 1 dry running protection electric control panel
  • Selector switch for:
  • Manual position (start motor)
  • Stop position (stop motor)
  • Automatic position (dry running protection include)
  • Led indicators for:
  • Pressure switch
  • Motor running
  • Thermal tripping
  • Minimum water level
  • Maximum water level
Dry running protection relay (this relay can be also used to start the motor for minimum level and to stop for maximum level).This protection is include in automatic position but is possible includes its also in manual position. Timer delay pressure switch range 0-20 minutes. Normally this function is used in irrigation when the motor must be protected for minimum pressure .In this case is necessary to delay the pressure switch when the motor start and after a time (normally is the time that the pump need to go in pressure) include the protection, elapse this time if the pressure go down the motor should be stopped.
Notes : All Controls Are In Low Voltage The pressure switch terminal can be also used to start the motor in automatic way by a remote signal for example: radio transmitter-timer-remote switch-floating

ELECTRIC PUMPS MOTOR STARTER PANELS ELEVATED AUTOTRASFORMER

Series 705 for version 400-1000V Standard composition Electric control panel-ad- with The circuit includes also:
electricalpump
Series 705 for version 400-1000V
  • 1 ip55 metal case ral 7032-7035
  • 1 line contactor starter ac3 dimensioned
  • 1 manual reset thermic starters for overload protection
  • 2 auxiliary protection fuse
  • 3 line protection fuses class am
  • 1 door-lock main switch
  • 1 auxiliary terminal board
  • 1 dry running protection electric control panel
  • Selector switch for:
  • Manual position (start motor)
  • Stop position (stop motor)
  • Automatic position (dry running protection include)
  • Led indicators for:
  • Pressure switch
  • Motor running
  • Thermal tripping
  • Minimum water level
  • Maximum water level
Dry running protection relay (this relay can be also used to start the motor for minimum level and to stop for maximum level).This protection is include in automatic position but is possible includes its also in manual position. Timer delay pressure switch range 0-20 minutes. Normally this function is used in irrigation when the motor must be protected for minimum pressure .In this case is necessary to delay the pressure switch when the motor start and after a time (normally is the time that the pump need to go in pressure) include the protection, elapse this time if the pressure go down the motor should be stopped.
Notes : All Controls Are In Low Voltage The pressure switch terminal can be also used to start the motor in automatic way by a remote signal for example: radio transmitter-timer-remote switch-floating
Series 706 for version 400-690V Standard composition Electric control panel-ad- with The circuit includes also:
electricalpump
Series 706 for version 400-690V
  • 1 ip55 metal case ral 7032-7035
  • 1 line contactor starter ac3 dimensioned
  • 1 manual reset thermic starters for overload protection
  • 2 auxiliary protection fuse
  • 3 line protection fuses class am
  • 1 door-lock main switch
  • 1 auxiliary terminal board
  • 1 dry running protection electric control panel
  • Selector switch for:
  • Manual position (start motor)
  • Stop position (stop motor)
  • Automatic position (dry running protection include)
  • Led indicators for:
  • Pressure switch
  • Motor running
  • Thermal tripping
  • Minimum water level
  • Maximum water level
Dry running protection relay (this relay can be also used to start the motor for minimum level and to stop for maximum level).This protection is include in automatic position but is possible includes its also in manual position. Timer delay pressure switch range 0-20 minutes. Normally this function is used in irrigation when the motor must be protected for minimum pressure .In this case is necessary to delay the pressure switch when the motor start and after a time (normally is the time that the pump need to go in pressure) include the protection, elapse this time if the pressure go down the motor should be stopped.
Notes : All Controls Are In Low Voltage The pressure switch terminal can be also used to start the motor in automatic way by a remote signal for example: radio transmitter-timer-remote switch-floating